General
This filtration system is ideal for vacuuming dust, wood chips, (sharp) debris, and similar materials in the workshop or DIY shed, or for example indoors during renovation work. The system functions as a pre-separator, capturing up to 99.99% of the dust so that it does not end up in the vacuum cleaner itself. Almost all vacuum cleaners can be connected to the system: standard household vacuum cleaners and professional dust extractors. Please refer to the tab Information –> Help –> Cyclone Filters to determine which filter is suitable for your vacuum cleaner.
Winter sale

Free shipping from €140. Valid within the Netherlands, Belgium, and Germany.
Filter combination metal M-30R consists of the newest version of the cyclone filter model M metal and the 30 liter stainless steel dustbin. The newest version of the metal filter is further developed, improving it on three aspects:
- The filter efficiency has been improved from a maximum of 99% to 99.99%, further reducing how often the vacuum bag needs to be replaced.
- The airflow has been increased by nearly 60%, from 220m³/h to 350m³/h, making the new metal filter suitable for even more (construction) vacuum systems.
- The new filter is made from more than 50% thicker metal (1.9mm), allowing it to last longer even with the most abrasive debris.
The metal filter system is particularly suitable for tasks where the material being filtered could cause wear. This may occur, for example, when vacuuming stone, glass, or metal debris. The metal cyclone filter model M can of course also be used for filtering regular dust such as wood chips, plastic pellets, granulate, and similar materials.
The 30-liter dustbin is made of stainless steel, making it resistant to rust. With a diameter of 30cm, it takes up 33% less space than the previous model — an ideal solution when space is limited. The dustbin is equipped with two reinforcing rings to prevent it from collapsing under high negative pressure. In addition, it features lid clamps, allowing the container to be opened easily without disconnecting all hoses, as is the case with screw-on lids. The systems also comes with a movable dolly, allowing it to be easily moved around.
Because both the filter and the dustbin are made of metal, the complete system can be grounded. This helps reduce the buildup of static electricity.
Highest Quality:
- Our metal filter model M filters up to 99.99% of dust (instead of 99% by other filters on the market).
- Made of industrial-grade metal with a thickness of 1.9mm (instead of 0.7mm sheet metal).
- Equipped with an NBR rubber sealing ring that will not deteriorate over time (instead of foam or cork rings).
















