Cyclone filter model L

 83,95 (incl. btw)

Cyclone filter model L is a large cyclone filter and can separate dust up to 95%. Due to its larger size it is most suitable for industrial vacuum cleaners and larger air extraction systems.

Out of stock

Ontvang een bericht wanneer het weer op voorraad is.

Description

This cyclone filter is a dust separator and is ideal for sucking up dust, wood chips, grit etc. in the (home) workshop or, for example, at home during a renovation. Cyclone filter model L works as a pre-separator, filtering up to 95% of the dust which therefore does not end up in the vacuum cleaner.

Result:

  • Replace far fewer vacuum cleaner bags because almost all the dust ends up in the dustbin;
  • Continuous maximum suction power because the vacuum cleaner bag hardly fills up;
  • Work longer with the use of a larger dustbin in comparison with a vacuum cleaner bag;
  • Longer lifespan of the vacuum cleaner due to less wear and tear on the engine.

Due to its larger size it is most suitable for industrial vacuum cleaners and larger air extraction systems.

Do you have questions? Most answers can be found on our FAQ page. Can’t find the answer? Please do not hessitate to contact us via our contact page.


Cyclone filter model L has a downwards rotated side inlet which pulls the dust more effective into the dustbin. The cyclone filter has a black flange for easy mounting onto a dustbin. The flange is detachable so it can easily be used to mark the necessary cutouts onto the lid of a dustbin. For an airtight connection of the cyclone filter onto a dustbin you can use a rubber gasket which can be ordered in combination with the model L filter. Filters systems without a rubber gasket run the risk of letting air through the cracks between the base plate and the lid of the dustbin. In that case the result will be a loss of vacuum power and a loss of efficiency of the filter system.

To be used with dust extraction:

  • Sander;
  • Table saw;
  • Sand blast cabinet;
  • Router;
  • Mitre saw;
  • Wall and floor grinder;
  • CNC router;
  • Vacuuming of (construction) floors;
  • And many other applications.

Compatible with:

  • 50mm vacuum hose. To connect a 50mm vacuum hose onto cyclone filter model L you need the reducer kit model L. The kit consists of the 75mm>50mm reducer plus the 50mm connector with hose clamp. The 75mm>50mm reducer slides into the side inlet of the filter. The 50mm connector then slides halfway into the 75mm>50mm reducer. The 50mm hose slides over the connector and is secured with the hose clamp. In schematic order: Cyclone filter L <– reducer <– connector  with hose clamp<– 50mm vacuum hose.

Specifications:

  • Filters up to 95%;
  • Airflow: 630m3/h maximum | 350m3/h minimum;
  • Inlet/outlet: outer diameter 83mm | inner diameter 75mm;
  • Colour: White;
  • Material: ABS;
  • Weight: 1600 gram.

Content:

  • Cyclone filter L;
  • Black flange;
  • 2 x hose clamp: range 76mm to 92mm;
  • Fasteners.

Do you have questions? Most answers can be found on our FAQ page. Can’t find the answer? Please do not hessitate to contact us via our contact page.

Additional information

Rubberen afdichtring

Without rubber gasket, With rubber gasket

You may also like…